Secret Recipe: How To Make Chocolate Coating That Hardens - Cake Decorist (2024)

Last Updated on March 17, 2023

Jump to RecipePrint Recipe

How to make chocolate coating that hardens? Do you like chocolate-coated recipes? Or dipping chocolate that hardens? Then you are in the right place. These dipping chocolate recipes are easy to make, and you only need a few ingredients. That is why your family and friends will surely enjoy these chocolate dipping recipes. So, try these recipes now!

Jump to Recipe

1) What You Will Need In Making The Perfect Chocolate Dipping Recipe

Ingredients

  • 1 1/2 cups of store-bought mini chocolate chips (semi-sweet) use pure chocolate chips
  • 2 tbsp of vegetable shortening (Crisco)

Equipment

  • Candy or candied fruits
  • Medium-sized bowl
  • Large bowl
  • Measuring cups
  • Small spatula
  • Two-pronged fork
  • Baking sheet
  • Wax paper

Servings and preparation time

Preparation Time: 30 minutes

Cooking Time: 0 minutes

Total time: 30 minutes

Yields: good for 30 candies

Step-by-step instructions

Step 1

Before anything else, if you store your candies inside the refrigerator, remove them ten minutes before coating them. Remember, cold candies can cause cracked coating.

Step 2

Afterward, put your chocolate chips and vegetable shortening inside a small or medium-sized bowl. Then, make sure to place your small bowl inside a large bowl.

Step 3

After that, fill the large bowl with warm water about 100 to 110 degrees Fahrenheit. Next, fill your large bowl only halfway on your small bowl. Also, please avoid water from getting inside the bowl with chocolate; even a drop of water is dangerous as it will ruin your chocolate.

Step 4

Next, stir your chocolate mixture using a small spatula for about sixteen to eighteen minutes. Likewise, you can stir till your chocolate melts. In addition to that, the mixture becomes smooth. Also, refrain from rushing the process; be patient.

Step 5

Remember, you may replace the water with warmer water if needed. Then, remove your bowl with your chocolate mixture from the water. Afterward, continue to stir for about two to three minutes. Likewise, you can do so until the chocolate slightly cools.

Step 6

Then, line a baking sheet with wax paper and set it aside. Also, poke one candy using your two-pronged fork. Afterward, dip it completely into your chocolate mixture. Also, ensure to tap the excess chocolate gently against your bowl’s side.

Step 7

Finally, place the dipped candy into your prepared baking sheet. Also, repeat the process with your remaining candies. If your chocolate mixture becomes too thick, place your bowl with the chocolate mixture inside a large bowl with warm water. With this, make sure to do so to achieve the desired consistency.

Secret Recipe: How To Make Chocolate Coating That Hardens - Cake Decorist (1)

Tips and tricks

For the most part, avoid any moisture when dealing with chocolate. Also, keep in mind that steam and droplets of moisture can cause your chocolate to seize. Besides, seizing will lead to crumbly and grainy chocolate.

Plus, if your chocolate dipping has seized, stir one teaspoon of vegetable shortening for every two ounces of melted chocolate. In addition to that, you may melt your chocolate using a double boiler over low heat.

For storing your chocolate, wrap it tightly. Afterward, make sure to store it in a dry and cool location. Also, do not refrigerate.

2) What You Will Need In Making An Instant Chocolate Coating

Ingredients

  • 2 cups of semi-sweet chocolate chips
  • 2/3 cup of coconut oil

Equipment

  • Measuring cups
  • Microwave-safe bowl
  • Small rubber spatula

Servings and preparation time

Preparation Time: 5 minutes

Cooking Time: 1 minute

Total time: 6 minutes

Yields: 2 cups

Step-by-step instructions

Step 1

First and foremost, place your chocolate chips and coconut oil inside a microwave-safe bowl. Then, microwave with thirty-second intervals, stirring each after the interval for about one to two minutes. Likewise, you can do it until the mixture becomes smooth. Afterward, be sure to mix for about a minute or until well combined.

Step 2

After that, dip your desired fruit or candy into the mixture. Lastly, let it set before serving. As always, make sure to enjoy.

Tips and tricks

In most cases, store your instant chocolate coating inside an airtight container at room temperature. Also, add more oil for a thinner, crisp hard shell coating. Besides that, for thicker hard coating, use less oil.

Wildone Baking Sheet & Rack Set

3) What You Will Need In Making Chocolate-coated Marshmallow Cookies

Ingredients

For the shortbread cookies

  • 3/4 cup of unbleached all-purpose flour, about 180 grams
  • 1/4 cup of sugar, about 60 grams
  • 1/2 tsp of baking powder, about 2.5 grams
  • 1/4 tsp of salt, about 1 gram
  • 1/4 cup of diced cold unsalted butter, about 60 grams
  • 1pc of egg
  • 1/2 tsp of vanilla extract, about 2.5 grams

For the marshmallow

  • 1 tbsp of powdered gelatin, about 15 grams
  • 1/4 cup of water, about 60 grams
  • 1/2 cup of sugar, about 125 grams
  • 1/4 cup of light corn syrup, about 60 grams
  • 1/2 tsp of vanilla extract, about 2.5 grams

For the chocolate coating

  • 8 ounces of dark chocolate (chopped), about 225 grams

Equipment

  • Food processor
  • Plastic cling wrap
  • Baking sheet
  • Parchment paper
  • Small saucepan
  • Mixing bowls
  • Electric mixer
  • Rolling pin
  • Round cookie cutter (4.5 cm)
  • Pastry bag with a 2cm plain tip
  • Fork
  • Microwave

Servings and preparation time

Preparation Time: 40 minutes

Cooking Time: 10 minutes

Additional Time: 1 hour for chilling and 30 minutes for setting

Total time: 2 hours and 20 minutes

Yields: 2 to 3 dozen pieces

Step-by-step Instructions

Shortbread cookies

Step 1

Ensure to combine your flour, sugar, baking powder, and salt in your food processor. Then, add butter and process until the mixture looks like sand. In addition to that, add your egg and vanilla. After that, process until you create a dough. Afterward, mold your dough into a disc. Next, wrap it with plastic wrap. Also, make sure to refrigerate for about thirty minutes.

Step 2

Next, put the oven rack in the middle part of the oven. Then, at 350 degrees Fahrenheit, preheat your oven. Also, line your baking sheet using parchment paper.

Step 3

Afterward, lightly dust your work surface. After that, roll out your dough to three mm thick. Then, cut out thirty cookies using a round cookie cutter. Finally, arrange your cookies on your baking sheet.

Secret Recipe: How To Make Chocolate Coating That Hardens - Cake Decorist (3)

Marshmallow

Step 1

Put water inside a small saucepan. Then, sprinkle your gelatin over the water. Also, allow the gelatin to bloom for about five minutes.

Step 2

Next, add your sugar to the gelatin mixture. After that, melt it over low heat. Also, stir the mixture until the sugar and the gelatin dissolve. Then, pour the gelatin mixture into a bowl. In addition to that, add your corn syrup and vanilla. Afterward, whisk using an electric mixer for about ten minutes. Likewise, you can whisk it until soft peaks form.

Step 3

Ultimately, fill your pastry bag attached with a plain tip with meringue. Then, pipe each cookie with a dome meringue. Also, let your cookies sit for about thirty minutes at room temperature.

Chocolate Coating

Step 1

Before anything else, melt 140 grams of chocolate using a double boiler. Then, once the chocolate melts, make sure to remove it from the heat. Afterward, add the remaining chocolate. Also, make sure to stir till the chocolate turns smooth.

Step 2

After that, dip your cooled cookies with the marshmallow side down into your chocolate and flip. In addition to that, remove the cookie using a fork. Then, tap to remove excess.

Step 3

Lastly, arrange your cookies on a baking sheet lined with parchment paper. After that, make sure to refrigerate for about thirty minutes. As usual, be sure to serve and enjoy!

Does Chocolate Mirror Glaze Harden?

Mirror glaze does not harden as you may think. Mirror glaze is usually made from sweetened condensed milk, gelatin, and water. It’s then poured onto cakes, rather than spread. The mirror glaze then sets (due to the gelatin), but it does not go hard. It also doesn’t harden too much because it has a much lower sugar content.

How Do You Harden Chocolate Syrup?

If you want to harden your chocolate syrup, it can be quite difficult. You can try placing it in the freezer for a few hours, but this will likely end up with a chocolate paste that is hard to work with. For this reason, it’s best to make your hardened chocolate syrup. You may have seen it called “Magic Shell” and it only requires two ingredients!

Ingredients

The ingredients you’ll need for this recipe are:

  • 2 cups of semisweet chocolate chips
  • 2/3 cup of coconut oil

Recipe

Now all you need to do is:

Add your coconut oil and semisweet chocolate chips to a bowl (be sure it’s microwave safe). Place in the microwave for 30-second increments. Keep mixing as you heat. The mixture should be smooth in around 1-2 minutes. Once mixed for around a minute, keep it at room temperature for the best results. It is that easy!

How to Make a Hard Chocolate Coating From Cocoa Powder?

If you’re looking to make a hard coating from cocoa powder, it couldn’t be easier! Let’s take a closer look.

Ingredients

The ingredients you’ll need for this recipe are:

1 cup of coconut oil
1 cup of cocoa powder
1/2 cup of honey
2 tablespoons of pure vanilla extract
1/2 teaspoon of salt

Recipe

Now all you need to do is:

Add the coconut oil, cocoa powder, and honey to a pan and heat over low heat. Keep stirring until the ingredients are combined. At this point, you can add the vanilla extract and salt to the pan. Again, keep stirring until completely combined. Now use the coating as you wish. Enjoy!

How to Make Hard Chocolate Bar?

If you’re looking to make your dipping chocolate harden, you usually just need to add a little butter or cream to the mixture, coat whatever you want, and then place it in the refrigerator. However, if you want to make your chocolate bars and need them to harden, the process is slightly different. The ingredients you’ll need for this recipe are 1/4 cup of cocoa powder, 3 tablespoons of coconut oil, and 3 tablespoons of pure maple syrup.

Now all you need to do is warm the oil and then add all ingredients to a bowl. Keep mixing until it becomes thick. Pour into a chocolate mold, or any flat container and chill until hard.

How Do I Make White Chocolate Hard?

White chocolate is one of the easiest to get hard. All chocolate chips harden quicker and harder once they have been melted. All you need to do is heat around 3/4 of the chocolate you’re using in a microwave. Heat for around 20 seconds and stir, then repeat. After this point, check every 5 seconds or so, as it will burn quickly. Add the remaining 1/4 of the chocolate and keep stirring. Now use it as needed and it will set.

How to Make Hard Chocolate With Nutella?

The dream is hard chocolate Nutella – and we’re here to tell you how to achieve this. All you need is a 13oz jar of Nutella and 3 tablespoons of solid coconut oil. Now all you need to do to make this Nutella magic shell is add both ingredients to a microwave-safe bowl and microwave for around 30 seconds.

It may need slightly longer for the coconut oil to melt. Keep stirring until completely smooth and then place in an airtight container. When you’re ready to use, pour over ice cream and it will instantly harden!

Pin Recipe

Print Recipe

5 from 1 vote

How To Make Chocolate Coating That Hardens

How to make chocolate coating that hardens? Do you like chocolate-coated recipes? Or dipping chocolate that hardens? Then you are in the right place. These dipping chocolate recipes are easy to make, and you only need a few ingredients. That is why your family and friends will surely enjoy these chocolate dipping recipes. So, try these recipes now!

Prep Time30 minutes mins

Total Time30 minutes mins

Course: Dessert

Cuisine: American

Keyword: chocolate-coated recipes, coating chocolate, dipping chocolate that hardens, how to make chocolate coating that hardens

Servings: 30 candies

Equipment

Ingredients

  • 1/2 cups of store-bought mini chocolate chips (semi-sweet) use pure chocolate chips
  • 2 tbsp of vegetable shortening (Crisco)

Instructions

  • Before anything else, if you store your candies inside the refrigerator, remove them ten minutes before coating them. Remember, cold candies can cause cracked coating.

  • Afterward, put your chocolate chips and vegetable shortening inside a small or medium-sized bowl. Then, make sure to place your small bowl inside a large bowl.

    1/2 cups of store-bought mini chocolate chips (semi-sweet) use pure chocolate chips, 2 tbsp of vegetable shortening (Crisco)

  • After that, fill the large bowl with warm water about 100 to 110 degrees Fahrenheit. Next, fill your large bowl only halfway on your small bowl. Also, please avoid water from getting inside the bowl with chocolate; even a drop of water is dangerous as it will ruin your chocolate.

  • Next, stir your chocolate mixture using a small spatula for about sixteen to eighteen minutes. Likewise, you can stir till your chocolate melts. In addition to that, the mixture becomes smooth. Also, refrain from rushing the process; be patient.

  • Remember, you may replace the water with warmer water if needed. Then, remove your bowl with your chocolate mixture from the water. Afterward, continue to stir for about two to three minutes. Likewise, you can do so until the chocolate slightly cools.

  • Then, line a baking sheet with wax paper and set it aside. Also, poke one candy using your two-pronged fork. Afterward, dip it completely into your chocolate mixture. Also, ensure to tap the excess chocolate gently against your bowl's side.

  • Finally, place the dipped candy into your prepared baking sheet. Also, repeat the process with your remaining candies. If your chocolate mixture becomes too thick, place your bowl with the chocolate mixture inside a large bowl with warm water. With this, make sure to do so to achieve the desired consistency.

Notes

For the most part, avoid any moisture when dealing with chocolate. Also, keep in mind that steam and droplets of moisture can cause your chocolate to seize. Besides, seizing will lead to crumbly and grainy chocolate.

Plus, if your chocolate dipping has seized, stir one teaspoon of vegetable shortening for every two ounces of melted chocolate. In addition to that, you may melt your chocolate using a double boiler over low heat.

Want more recipes?Check out Our YouTube Channel!

Facebook Comments

Secret Recipe: How To Make Chocolate Coating That Hardens - Cake Decorist (5)

Zarah Grace

Zarah is an experienced pastry chef whose creations have delighted countless customers. With a passion for baking, Zarah has developed a unique style that combines classic techniques with modern flavors. Her desserts are consistently crafted with the finest ingredients, and her attention to detail is evident in the stunning and delectable results. Zarah has a wealth of experience in the pastry kitchen, and loves to share her knowledge with others. Whether it is teaching a class or creating a custom cake for a special occasion, Zarah is committed to making sure every customer is satisfied.

Do you like this article? Share with your friends on Facebook.

Secret Recipe: How To Make Chocolate Coating That Hardens - Cake Decorist (2024)

FAQs

How do you make chocolate shiny after hardening? ›

Coconut oil is the secret to achieving a super-shiny chocolate coating. It brings a little extra luster to melted chocolate, which, on its own, can become matte when dry. Not only does coconut oil make your chocolate coating shine, but it also helps the chocolate harden.

What is the best chocolate for coating? ›

It's no secret that the best chocolate covered candies are made from good quality chocolate bars and couverture chocolate is the recommended type of chocolate since it contains more cocoa butter, making it easier to work with for a dipping chocolate.

What is the difference between chocolate coating and chocolate? ›

The difference between regular chocolate and chocolate coating wafers lies in the absence of cocoa butter (the typical fat in chocolate), making coating chocolate wafers much easier to use. With coating chocolate, there's no tempering, and it's solid at room temperature.

Why is my baking chocolate not hardening? ›

However, if your chocolate hasn't set, there are a few reasons why this could be. It could be that your room temperature is too high. If the temperature is over 68 F, this can cause problems. The ideal setting temperature is between 65 and 68 degrees Fahrenheit.

What is the secret to shiny chocolate? ›

The big secret is constant stirring. Even if the chocolate gets a little too hot, it can be saved with constant stirring. To get good crystallization of the beta crystals started, cool the chocolate rapidly to 82 degrees for dark and 79 degrees for milk and white.

What makes chocolate coating hard? ›

The most frequently used technique for hardening chocolate is tempering, which both chocolatiers and manufacturers routinely use in production. The process involves controlled heating of the chocolate, followed by cooling, agitation, and the addition of seed chocolate to initiate the crystallisation process.

What kind of chocolate is best for hardening? ›

The best chocolate for melting and hardening is couverture chocolate. Couverture chocolate contains a higher cocoa butter content, which makes it ideal for tempering—a crucial process for achieving a glossy finish and hardness. This type of chocolate ensures a smooth texture and excellent flavor.

What is the best chocolate for melting and hardening? ›

Couverture chocolates have been specifically designed to use as a coating, with a minimum of 31% cocoa butter, so they're easy to temper even if you're unfamiliar with the process. Brands like Valrhona, Callebaut, Cocoa Barry, and Scharffen Berger are easy to find in gourmet grocery stores or specialty shops.

What kind of chocolate is good for coating? ›

Indeed, a couverture chocolate like Valrhona's Guanaja 70% has a high fat content. It's the cocoa's fats which give your coating its shine and fluidity, guaranteeing the perfect result.

What is coating chocolate made with? ›

In 'coating' chocolate, the cocoa butter is replaced by vegetable oils and cocoa powder is used instead of cocoa mass. Real chocolate has a better taste and mouth feel than most coating chocolates.

What can I add to chocolate to make it harder? ›

You don't add ingredients to chocolate to make it harden, you temper it by heating it to a specific temperature, cooling it to another temperature, then heating it again. This causes the chocolate to crystalize in a way that leaves it hard and shiny. The temperatures are different for different kinds of chocolate.

How do you increase the hardness of chocolate? ›

Tempering is the process of altering the temperature of the chocolate to change its crystal composition. If we venture into science for a second, temper refers to the act of heating and cooling metal to increase its hardness. The same process happens in chocolate.

Why is my chocolate cake so hard? ›

Often if the edges of a cake are hard and dry then the oven temperature is slightly too high. If you are finding that the cake layers have peaks in the centre when they come out of the oven then this would confirm that the oven temperature is slightly high.

How do you get a glossy finish on chocolate? ›

Chocolate Tempering

Proper “tempering”—heating and cooling chocolate to stabilize it for making candies and confections—gives chocolate a smooth and glossy finish, keeps it from easily melting on your fingers, and allows it to set up beautifully for dipped and chocolate-covered treats.

What is added to chocolate to make it glossy? ›

And now for that secret ingredient: It's glucose! Glucose is the secret to making your ganache extra shiny and glossy, no matter if you're using dark chocolate or white chocolate. Just a small amount of glucose or corn syrup will help give your ganache that irresistible, gorgeous shine, even after it has cooled down.

Why is my melted chocolate not glossy? ›

If it looks dull or streaky, re-temper the chocolate from the beginning. If it dries quickly with a glossy finish and no streaks, the chocolate is in temper.

Which process gives chocolate its nice glossy look? ›

In order to produce a smooth, glossy, blemish-free and bubble-free bar of chocolate that gives a crisp snap when broken or bitten into, chocolatiers need to go through the process of tempering — manipulating the temperature of the chocolate during the cooking process to control the crystallization of the cocoa butter.

Top Articles
Latest Posts
Article information

Author: Duane Harber

Last Updated:

Views: 5820

Rating: 4 / 5 (51 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Duane Harber

Birthday: 1999-10-17

Address: Apt. 404 9899 Magnolia Roads, Port Royceville, ID 78186

Phone: +186911129794335

Job: Human Hospitality Planner

Hobby: Listening to music, Orienteering, Knapping, Dance, Mountain biking, Fishing, Pottery

Introduction: My name is Duane Harber, I am a modern, clever, handsome, fair, agreeable, inexpensive, beautiful person who loves writing and wants to share my knowledge and understanding with you.